You can use Akuvox indoor monitor to check live view and capture of the Milesight camera.

Requirements: Akuvox and Milesight devices should be in the same LAN.

Add camera via Onvif:

(1) On Milesight web, go to Basic Settings > Network >More to enable ONVIF.

(2) On Akuvox Indoor Monitor, tap Settings > Advance Settings, and enter the default password 123456.

(3) Tap Monitor and Scan. You will find the ONVIF URL here. Tap the corresponding URL and enter username and password.


(4) Choose profile and enter the device number, name. Tap Save to finish the configuration.


(5)Now, on the home screen tap Monitor and choose ONVIF device to check live view.

Add camera via RTSP:

On the device web, go to Device > Monitor. Enter device number, device name, RTSP address, and username and click Add to add the camera.

Milesight RTSP streams are as follows: