Hi,
There are two ways to add users' fingerprint to the R29-CT doorphone.
First, fingerprint can be added on the R29CT device via screen. For this, you should first access the settings by pressing the call key, dialing 9999 and entering the password 3888. From here, you can reach the fingerprint settings and add the users' fingerprint on the device by scanning it.
The second method is to add fingerprints from the R29-CT web interface. For this, you should open the intercom > fingerprint heading in the web interface.
On this page, you should fill in the required parts in the Finger Key Setting field as;
- Finger DoorNum: fingerprint that you saving shoul open which door should open
- Finger Day: fingerpring that you saving should work which days
- Finger Time: fingerpring that you saving should work which hour interval
- Finger Name: apartment or user name
- Lift Floor Number: fingerpring that you saving should call lift to which floor
Then press obtain button and scan user's finger on R29CT’s fingerprint area. Thenceafter end user should scan his/him fingerprint second and third times. While scanning fingerprint over R29CT’s fingerprint area, you can check over web interface 1st,2nd and 3rd fingerprint areas turn red to gray. When scanning is over press Add button.
You can see all added finger prints informations on Finger Key Management field and manage over there.
Regards.