Show RTSP video during a SIP call

Show RTSP video during a SIP call

Hello,
I bought an Akuvox R20A doorbell and C313W indoor monitor.

I would like to integrate them with my SIP PBX (FusionPBX) and I've been successfull in doing this. I can call from the doorbell any phone inside the company, and with a ring group i can call the reception.

However, I would like for the indoor display to show video from the doorbell as soon as a call is received via PBX, ideally via RTSP. However, this doesn't seem to work as i'm forwarding the call to a ring group which is composed by mostly phones which only support audio.


Is this possible?


All comments 10
    ercntrn 2022-06-20 21:37:03
    Note: The author has been banned or deleted.
    edocod1 2022-06-21 13:58:59
    Edited by edocod1 at 2022-06-21 15:44

    So,you screenshot means that every time a call from "100" arrives, the RTSP stream you set will be shown?

    EDIT: thank you very much. indeed now it works correctly.
    Thanks!

    ercntrn 2022-06-22 15:13:15
    Note: The author has been banned or deleted.
    edocod1 2022-07-08 16:14:29
    Hello.
    This all worked correctly for some time, but now the monitor just shows a black screen upon calling.

    This is the setting of the R20A:


    And this is the setting of the C313W:


    I also tried to enable auth but with no success.
    ercntrn 2022-07-09 21:41:39
    Note: The author has been banned or deleted.
    edocod1 2022-07-12 17:05:32
    I have added username and password, but no success. I only get a black screen.

    I can see the stream using VLC if i use the same details on my computer, so i guess those are correct.
    I am using the "monitor" function on screen so i don't need to go through SIP server, and it still doesn't work.
    ercntrn 2022-07-13 01:39:49
    Note: The author has been banned or deleted.
    edocod1 2022-07-13 16:00:29
    I can make call over IP succesfully and i can see the video stream from any computer on my network, both when using 1080p, 720p and also h265.

    When using VGA resolution, the screen is still black.
    edocod1 2022-07-13 16:01:24
    Keep in mind i am not using the SIP server now, but trying to look at the stream using the "Monitor" button with the R20A IP directly (no sip server).
    12Next
You have to log in before you can reply Login | Sign up