Requirements:

SIP account, Password, and Name provided by Cybertwice.

Applicable to all Akuvox Door Phone

Configuration on Akuvox Door Phone Steps:

1. Enter the device IP address and log in to the web interface. (The default user name and password both are admin.)

2. For single-tenant devices, navigate to Intercom > Basic to configure the push button, entering the corresponding email address.

For multiple-tenant device, navigate to Intercom > Key/Display to enter email address.

3. Navigate to Account > Basic to configure the following in the figure and click Submit. Then, wait for the status to change to‘Registered’.

4. Navigate to Account > Advanced to configure Codecs and Video Codec as the figure shows, then click Submit.