Is it possible to use a A02 to send http commands to an A094S to open multiple doors and trigger relays?
i have an A02 located at the first door, connected to the network, and an A094S at another place of the building connected to two more doors.
when a card is used, i want the a02s to open the local door with the built in relay and send a command to the a094s to open the other doors and also send a command (tcp/udp..... command) to a mediacontrol system to trigger some actions.
is that possible and are there any recommendations?
It is not possible to send multiple different HTTP commands at one time. However, one HTTP command can be sent out when triggering the local relay. Sending commands to A094 and other systems can only be done alternatively.
