Good day,
My current setup:
I have a 1x R29 door station, 2x X912 door stations, 7x S652 indoor stations
The R29 has an motorised gate wired to the R29 relay A
The X912 number 1 has a main door wired to the X912 relay A
The X912 number 2 has a pedestrian gate wired to the X912 relay A.
I would like to create 3 soft buttons in call / monitor / taking page to be able to unlock either door.
Can this be done?
Is there any way to select different HTTP ie HTTP1, HTTP2, HTTP3 on the soft call setup block as you can on the Soft call setup with DTMF 1-2-3. Currently you can create 3 buttons but the selection of HTTP is just HTTP.
Here's how our device's logic operates: For example, to monitor conversations between specific users, you must activate the relay of the corresponding device.
Maybe try using the Action URL function, depending on unused relays in the door stations you could make it so when Relay B on one of the X912 is triggered it will trigger Relay A on the R29
