The break-in intrusion feature makes door phones or access control terminals sound an alert when the door is forced open.
1. Use the device IP to log in to its web interface. The initial username and password are both admin.
2. Navigate to the Intercom > Input interface.
3. Enable the Break-in Intrusion.
4. Click Submit to save the settings.
When the door is forced open, an alarm will be triggered.
If you want to disarm the alarm, disable break-in intrusion on the web interface or enter the disarm code.
The disarm code can be configured on the Security > Basic > Disarm Setting interface.
On the SmartPlus Cloud
If the device is deployed on the SmartPlus Cloud, you can set up the break-in alarm feature on the cloud.
Both installers and property managers can set up this feature for devices in new office projects(created after Oct.15, 2024).
Take an installer account as an example.
1. Log in to the SmartPlus Cloud platform with your account.
2. Click of the target office.
3. Click Devices on the left column.
4. Click of the target device.
5. Click Door and find the Door Status part.
6. Select the input that is connected to the door sensor.
7. Enable the break-in alarm feature.
8. Click Submit.