Hello Akuvox members,

I am a bit stuck on a requirement and hopefully someone maybe able to assist.

The scenario:-

We have installed:-

1 x R20A at front gate.

6 x C313W-2 Touchscreens throughout the house.

Customer has an old door button at front door which is a drycontact N/O trigger that was previously used to trigger several doorbellbuzzers in the house.

They do not want a door phone on the house front door but toutilise the existing doorbell button.

Wiring availability:-

I have ability to wire the existing doorbell cable to eitherthe front gate door phone input or wire it to an input on only one of the sixinternal touchscreens.

Requirement:-

To be able to call and pop-up message on all 6 internaltouchscreens when N/O dry contact front doorbell button is pressed.

Is there a way to program when an input is triggered eitheron the door phone input or an input on one of the C313W-2 to send a http call ormulticast call to all indoor monitors?

I am aware the C313W-2 has a doorbell input, and if used wouldneed it to broadcast to all internal touchscreens.

Your assistance would be greatly appreciated.

Thank you, Philip