Third-Party Brand | Third-Party Model | Features | Compatible Models and Versions |
Control4 | / | 1. Enable communication between the Akuvox device and the C4 App, as well as C4 tablets. 2. Support remote door unlocking via the C4 App. 3. Report device events to C4 (HTTP door opening, Input, Relay). | Click herefor details. |
KeyKing | BF-333 | Send the floor command to the elevator system to call or send the elevator after users open the door. | R29 and R20 with the latest versions. |
Network Optix | Nx Witness | 1. The video management system can scan for the Akuvox device and add it to the system. 2. The system can access the audio and video streams from the device. 3. The system can remotely unlock the device. | Click here for details. |
Milesight | MS-C2966-RFLWPE | When the LPR camera identifies a license plate, it sends the information to the Akuvox device via an API. The device then verifies the license plate to grant access. | Click here for details. |
Uniview | NVR301-04-P4 | 1. The video management system can scan for Akuvox devices and add them to the system. 2. The system can access the audio and video streams from the devices. | Click here for details. |
Avycon | AVR-NSV04P4 | The NVR shows the live feed from the Akuvox devices. Configure motion detection zones on the NVR, and this configuration will be sent to the device. When motion is detected, it will be reported to the NVR via the ONVIF protocol. | Click here for details. |
KONE | The elevator control panel supports GCAC or RCGIF protocols. | After the user opens the door controlled by Akuvox devices, the floor command is sent to the elevator control management system to call and send the elevator. | Click here for details. |
Avigilon | Avigilon Control Center Server-7.4.4.14 | The video management system can scan for Akuvox devices and add them to the system. The system can access the audio and video streams from the devices. | Click here for details. |
Zipato | All | Support intercom interaction between Akuvox and Zipato devices, allowing users to make calls and open doors flexibly. | Click here for details. |
Milestone | XProtect 2019/2020 R3 | 1. Adjust the RTSP stream frame rate, resolution, and bitrate of the Akuvox device. 2. Monitor changes in the input status. 3.Detect and control the relay switch. | Click here for details. |
Genetec | Sipelia | Support video and audio calls, and door opening via DTMF code from the Genetec side. | Click here for details. |
Carson | / | Support intercom calls, remote door opening, and display live feeds from Akuvox devices. | Click here for details. |
Indoor Monitors
Third-Party Brand | Third-Party Model | Features | Compatible Models and Versions |
Control4 | / | 1. Enable communication between the indoor monitor and the C4 App, as well as C4 tablets. 2. Modify the basic settings of the indoor monitor on the Control4 controller. 3. The Android indoor monitor supports installing the Control4 app. | Click herefor details. |
AJAX | Transmitter Jeweller Relay Jeweller Hub 2 Jeweller Relay Jeweller Hub 2 Jeweller Motion cam | The indoor monitor can arm and disarm, view AJAX device information, receive AJAX alarm notifications, and control AJAX relays. | Click here for details. |
Hikvision | All NVR | The indoor monitor can automatically scan NVR information and retrieve the monitoring list. Users can control real-time monitoring and playback on the NVR using voice commands. | Click here for details. |
Uniview | All IPC |
SmartPlus Cloud
Third-Party Brand | Third-Party Model | Features | Compatible Models and Versions |
Uniview | IPC3614LE-ADF28K-G | By adding the third-party cameras to the SmartPlus Cloud, users can monitor through the cameras and switch the video streams between Akuvox door phones and cameras on indoor monitors or their SmartPlus Apps. | All indoor monitors. Click here for details. |
TPLINK | TL-IPC544TP-WB6 | ||
Hikvision | DS-2CD3346P1-L | ||
Dahua | DH-3H3200-ADW | ||
Milesight | MS-C2962-FIPB | ||
Tiandy | TC-C321N SPEC:I3/E/Y/2.8mm | ||
AXIS | / | ||
Yale | Assure Lock 1 and Lock 2 | Users can bind their Yale account to their SmartPlus Apps, then control locks through SmartPlus, which supports linking with the Akuvox device for coordinated unlocking. | Click here for details. |
Qrio | SL2 | Users can bind their Qrio account to their SmartPlus Apps, then control locks through SmartPlus, which supports linking with the Akuvox device for coordinated unlocking. | Click here for details. |
BSI | Support BSI locks that feature Bluetooth. | SmartPlus App can scan and add BSI locks via Bluetooth, and control the locking and unlocking of the locks. | Click here for details. |
Dormakaba | EVO LZ Serial | 1. Installers manage and assign locks. 2. Supported unlocking methods: remote unlocking via app, linked unlocking with the Akuvox device, PIN, and RF card. 3. Support obtaining offline codes for door access. 4. Support receiving low battery notification. | Click here for details. |
Salto | Bluetooth locks, XS4 series, and Aelement series. | After the installer binds the Salto account to their SmartPlus account, the relevant locks will be synchronized to the cloud, allowing the installer to assign them to the corresponding projects. | Click here for details. |
iTec | All | 1. Installers bind the iTec lock account to their SmartPlus account and manage the assignment of gateways and locks. 2. Supported unlocking methods: remote unlocking via app, linked unlocking with the Akuvox device, PIN, and RF card. 3. Support receiving low battery notification. 4. Supports setting the lock to stay unlocked. | Click here for details. |
TTlock | All | Users add locks with their SmartPlus Apps. They can control locks through SmartPlus, which supports linking with the Akuvox device for coordinated unlocking. | Click here for details. |
Rent Manager | / | Support the data synchronization between the Rent Manager and the SmartPlus Cloud. Property managers can easily maintain one database for tenant management. | Click here for details. |
Alexa | / | Users link their SmartPlus App account to the Alexa App, open doors, and arm/disarm by saying commands to Alexa. | Click here for door-opening feature details. Click here for arming/disarming feature details. |
Siri | / | Users can ask Siri to open doors. | Click here for details. |
Milesight | All NVR | Installers and users can add the NVR to the SmartPlus Cloud. Users can view its live stream and playback. | Click here for details. |
Yunji Robot | Yunji GOGO Intelligent Double-Layer Delivery Robot. | When the robot arrives at residents’ rooms, the resident’s SmartPlus App/indoor monitor will push a notification. Residents can summon the robot by tapping on the indoor monitor. | Click here for details. |