This tutorial shows you how to integrate your Akuvox door phone with a Fujitec lift control system. After setup, users can call the lift and access authorized floors using credentials registered on the door phone.
Compatible Model & Firmware Version
- Model: Akuvox S535
- Firmware: 535.30.10.266 or higher
Set up Lift Contro
1. Use the device’s IP to log in to its web interface. The default username and password are admin.
2. Navigate to the Device > Lift Control interface.
3. Select Fujitec in the Lift Control List dropdown menu.
4. Enter the Server IP and Index provided by the Fujitec system.
5. Configure the Time Out, which defines the timeout period for sending requests to the Fujitec lift system.
6. Set the starting floor by selecting Floor Starts From.
7. Submit the setting.
Assign Credentials to Users
1. Go to the Directory > User interface.
2. Click Add or to set up access methods for a new or an existing user.
3. Enter the username and set up desired credentials.
4. Scroll to the Access Setting section and choose the accessible floor(s).
5. Submit the setting.
When a user presents their credential(RF cards, fingerprints, Bluetooth, etc) on the door phone:
- The door phone displays the designated lift to take.
- The authorized floor buttons are automatically unlocked on the Fujitec lift panel.