Akuvox doorphones and Zipatile 2 Integration

Akuvox doorphones and Zipatile 2 Integration

Edited by ercntrn at 2022-03-11 02:25

1.Akuvox doorphone>Zipatile 2 relation

The Akuvox doorphone intercom unit should beable to call IP addresses inside its network. Zipato application expects callson port 5060 on the IP address that’s assigned to Zipatile2.

Example:
Zipatile2 IP address is 192.168.1.105. It isnecessary to add Zipatile2 IP address, name, and prefix (call number) on theIntercom web UI (Dial plan or PhoneBook).The Akuvox doorphone intercom unit should beable to call IP addresses inside its network. Zipato application expects callson port 5060 on the IP address that’s assigned to Zipatile2.

Example:
Zipatile2 IP address is 192.168.1.105. It isnecessary to add Zipatile2 IP address, name, and prefix (call number) on theIntercom web UI (Dial plan or PhoneBook).

Resim1.png

2.Add Akuvox doorphone unit in the contact list

On the Zipatile 2 go to the Intercom menu andselect the add contact button in the bottom right corner:

Resim2.png

Next, create a contact for the Akuvoxdoorphone unit device. Enter the contact information for the contact:
Firstname / Lastname - Display name for thecontact.
SIP URI - This is the identifier for thecontact in the format ip_address@ip_address (Outdoor unit IP address).
After you enter the required information pressSAVE.
Next, enter the contact details interface byselecting the Intercom Akuvox doorphone unit contact:
In the contact interface select the Editoption in the top right corner:

Resim3.png

On the bottom enable the Doorphone option -This will enable the Door Open option during the call which will allow us tosend the DTMF signal to the Intercom outdoor unit.
In the Camera URL field enter the RTSP linkfor the Intercom Akuvox doorphone unit.

Resim4.png

If you’ve set up the RTSP link correctly assoon as you go back into the contact details a live stream from the Intercom Akuvoxdoorphone unit will be visible:

Resim5.png

Next go back to the main Intercom menu andselect the Gear option in the top right corner to enter the Intercom settingsmenu again:

Resim6.png

In the Door code field, set the code for theDTMF signal which will be sent to the Intercom outdoor unit - in this exampleit’s a 4-digit DTMF 1234:

Resim7.png

3.DTMF Code set on the Intercom Akuvox doorphone unit

Since we’ve set a 4-digit code on the ZipatileIntercom app we are going to enable the 4 Digits DTMF.
Next, we are going to enter the DTMF codewhich will trigger the relay.
After that press Submit to save the settings.

Resim8.png





All comments 0
You have to log in before you can reply Login | Sign up