Akuvox doorphones INSPINIA Panel IP Call integration

Akuvox doorphones INSPINIA Panel IP Call integration

Edited by ercntrn at 2021-12-16 15:40


In this topic,we will explain the IP communication between Akuvox and Inspina panel.INSPINIA is based on the built-in web server, which provides a simple facility to control and monitor the home and building automation system. INSPINIA can integrate with a wide variety of protocols and standards, as well as worldwide KNX standard, VRV/VRF, SCS, Modbus RTU RS232/485. The listed protocol types can be provided via special links.
For more detailed information, I am sharing the manual this device in the attachment.

We can call over IP Inspınıa panels with Akuvox doorphones but of Inspınıa panels intercom feature is working from 6000 port. Therefore We need to make direct IP port feature '6000' from Akuvox doorphone panels. Also If you call Inspına panels from Akuvox indoor panels we need to make direct IP Port '6000' in indoor monitors.
For more detailed information about how do we configuration you can examine document in the attachment.


Inspina_Panel_Akuvox_Integration.pdf

390.04 KB, Downloads: 21

manual_inspinia.pdf

1.3 MB, Downloads: 14

All comments 0
You have to log in before you can reply Login | Sign up