Installation&Hardware

kit is being optimized. According to our design, if C313W-2 is connected to wifi, the device it is connected to cannot be dhcp routed by wifi to ip. Instead, C313 will be used as a route to obtain the ip that reaches 10.0.0.x.

It doesn't seem to be suitable for old house renovation.

You can let the installer continue to pay attention to this youtube account, we will update the installer video irregularly every month.

Hi, I have also "18.30.4.38.rom" firmware file and can upgrade but ı will wait ticket reply. Thanks.

You explained it in detail, and you are great.

1. To connect a sensor to X933H, you can long press the button or put a pin into the reset hole for more than 5 seconds until you see the indicator flashes quickly, release it, and wait for the search results to be displayed on X933H. If it fails, try again. Or refer to sensor instruction manual for ...

Hi Judy, this is an initialization interface when you first open X933H. X933H needs to be worked with Akuvox smart home cloud. before you first boot it, you need to add it to the cloud, then finish this initialization. About how to connect to Akuvox smart home cloud, you can refer to https://know ...

It was useful thanks Kind regards Amir